BATCH DATA COMMUNICATIONS/BATCH INPUT/INBOUND-OUTBOUND (BDC’s)
ABOUT DATA TRANSFER
Implementing a new software system takes major effort. New implementation requires moving data from the present system i.e., legacy system into the R3 system. The product, components, customers and vendors have to be available in the new system. Initial data transfer is the process of populating your R3 database with data from your legacy system.
To prepare for the data transfer there are certain tasks you need to perform.
• First, understand your SAP system to know which data needs to be transferred, e.g., you would not transfer any sales order if you do not use the Sales and distribution module.
• Second, you need to know the contents of existing data in your legacy system.
Data transfer program, an effective and efficient way of transferring large amount of data into your new system, saves time and resources. But more importantly it ensures that accurate data is transferred into R/3.
Two steps involved in data transfer are CONVERSION and SAP DATA TRANSFER.
• CONVERSION, data is converted from your legacy system into the required flat file format.• SAP DATA TRANSFER, data is automatically entered into the SAP system. A SAP data transfer program reads the prepared data from the flat file and moves it into R/3.
Steps for any data transfer
Preparation for legacy database
This is the first step of transfer though not associated with SAP, plays very important role in data transfer.
Before data is extracted, delete obsolete data in the legacy system and fix inconsistencies. It is easier this way, than doing it during conversion.
The two steps involved in this are:
Data purging: Before transferring data from legacy system, delete all the old and obsolete data, e.g.: To save conversion time and disk space, you may delete all one-time customers, vendors and all unused materials.
Data cleansing: This process corrects data inconsistencies and ensures the integrity of the existing data during the transfer process. Mistakes must be fixed before the transfer.
Converting legacy data to the flat file
For this second step, SAP provides no specific tools.
• In the ABAP/4 development workbench, write an ABAP/4 program to convert a file from your legacy system into the required flat file structure.
• Use other programming language to write conversion program. For C, COBOL, you can easily download the table definition for specific flat file structure.
• Use third party tools, such as format editors and code generators, which support mapping and conversion between different file formats.
• For other RDBMS like oracle, Sybase, MS access, you have EXPORT utility. By which, you can directly export data to flat file.
Files will be discussed in detail in later part of the topic.
Getting the data into R/3
This step actually transfers data to SAP database. After converting the data into the flat file you are ready to begin the third step of the data transfer.
Data transfer is an interactive process. You may often feel like you are taking two steps forward and one step back.
For example, short steps involved in whole process are as follows:
• Convert the data from the legacy system into the flat file format.
• Run the data transfer program.
• Check data for error.
• Is the transfer working as it was designed?
• If not, adjust the data/conversion program and start with step 1. Go back to step one, if you don’t get the desired result.
You have three different options to enter your data into R/3.
• Automatically, with SAP standard data transfer programs.
• Automatically, by creating your own branch input programs
• Manually, by entering the data via the corresponding online transaction.
Automatic transfer with a standard data transfer program
This can be done if:
• A standard program exists for the data transfer of a business object in R/3.
• The data is available in electronic form.
• There is a significant number of records you want to transfer.
• The cost of converting the legacy data into the required flat file format is acceptable.
Manually transferring business objects
You should manually transfer data, if:
• You have no legacy system.
• There is only small number of records to enter.
• Translating legacy data into the R/3 structure is more an effort than manually entering the data.
Using customer specific batch input to transfer business objects
Create batch input program to transfer data if:
• No standard program exists to transfer the business object in R/3.
• The data is available in electronic form.
• There is a significant number of records you want to transfer.
• Translating your legacy data into the structure required by your custom program is easier than manually entering data.
Batch input is a standard procedure for transferring large amount of data into the R/3 system. It simulates manual data entry. Data consistency is ensured because batch input uses all the checks conducted on the normal screen. Using batch input is like entering the data online. Another advantage to batch input is that you do not have to check the data in advance.
Batch input is a two-step procedure. It involves a program that creates the batch input session. This session is the data file that includes everything to begin the transaction and the data to be entered on the appropriate screens. The data is not yet in the database tables of R/3 application. The second step is to process the session, which then actually transfers the data to database table. You can transfer data directly to database table by using CALL TRANSACTION method also. Another method - Direct Input, is done for high volume of data for the standard application. All these methods are discussed in detail in later part of the topic.
Basically there are two steps involved in any transfer of data from legacy system to SAP system.
- Creation of file and transferring file into SAP system
- Transferring data to database file
Whenever, you create flat file following points should be considered:
- Provide the data in an ASCII/Text file format.
- Know how each line of the file is structured.
- Know how the required flat file for the business object must be structured.
- Once your flat file is ready, the data should be transferred into SAP system.
FILE HANDLING IN SAP
Introduction
• Files on application server are sequential files.
• Files on presentation server / workstation are local files.
• A sequential file is also called a dataset.
Handling of Sequential file
Three steps are involved in sequential file handling
• OPEN
• PROCESS
• CLOSE
Here processing of file can be READING a file or WRITING on to a file.
OPEN FILE
Before data can be processed, a file needs to be opened.
After processing file is closed.
Syntax:
OPEN DATASET
IN {TEXT/BINARY} MODE
This statement returns SY_SUBRC as 0 for successful opening of file or 8, if unsuccessful.
OUTPUT: Opens the file for writing. If the dataset already exists, this will place the cursor at the start of the dataset, the old contents get deleted at the end of the program or when the CLOSE DATASET is encountered.
INPUT: Opens a file for READ and places the cursor at the beginning of the file.
FOR APPENDING: Opens the file for writing and places the cursor at the end of file. If the file does not exist, it is generated.
BINARY MODE: The READ or TRANSFER will be character wise. Each time ‘n’’ characters are READ or transferred. The next READ or TRANSFER will start from the next character position and not on the next line.
IN TEXT MODE: The READ or TRANSFER will start at the beginning of a new line each time. If for READ, the destination is shorter than the source, it gets truncated. If destination is longer, then it is padded with spaces.
Defaults: If nothing is mentioned, then defaults are FOR INPUT and in BINARY MODE.
PROCESS FILE:
Processing a file involves READing the file or Writing on to file TRANSFERTRANSFER Statement
Syntax:
TRANSFER
Each transfer statement writes a statement to the dataset. In binary mode, it writes the length of the field to the dataset. In text mode, it writes one line to the dataset.
If the file is not already open, TRANSFER tries to OPEN file FOR OUTPUT (IN BINARY MODE) or using the last OPEN DATASET statement for this file.
IF FILE HANDLING, TRANSFER IS THE ONLY STATEMENT WHICH DOES NOT RETURN SY-SUBRC
READ Statement
Syntax:
READ DATASET
Each READ will get one record from the dataset. In binary mode it reads the length of the field and in text mode it reads each line.
CLOSE FILE:
The program will close all
sequential files, which are open at
the end of the program. However, it
is a good programming practice to explicitly close all the datasets that were
opened.
Syntax:
CLOSE DATASET
|
SY-SUBRC will be set to 0 or 8
depending on whether the CLOSE is successful or not.
DELETE FILE:
A dataset can be deleted.
Syntax:
DELETE DATASET
|
SY-SUBRC will be set to 0 or 8
depending on whether the DELETE is successful or not.
Pseudo logic for processing
the sequential files:
For reading:
Open dataset for input in a
particular mode.
Start DO loop.
Read dataset into a field.
If READ is not successful.
Exit the loop.
Endif.
Do relevant processing for
that record.
End the do loop.
Close the dataset.
|
For writing:
Open dataset for output /
Appending in a particular mode.
Populate the field that is
to be transferred.
TRANSFER the filed to a
dataset.
Close the dataset.
|
Handling of local files
Introduction
Files on presentation server /
workstation are LOCAL FILES.
Local files are processed
using UPLOAD and DOWNLOAD functions. The local files are brought into ABAP/4
memory using these functions. Unlike dataset,
all the records of the file are UPLOADED into an internal table in one shot.
Similarly, all records are
DOWNLOADED in one shot from an internal table to a local file.
DOWNLOAD function:
Important EXPORTING parameters
for this function are:
Filename = name of the local
file to which the internal table is to be downloaded.
Filetype = file type, default values are ASC,
DAT, BIN
Mode = Write mode, overwrite (‘
‘) or append (‘A’)
Important IMPORTING parameters
are:
Filename = actual file name
entered
Tables to be passed to the
function:
Data_tab = the internal table
that is to be downloaded.
Similar function called
WS_DOWNLOAD is used to download the information from internal table to local
file. The only difference between DOWNLOAD and WS_DOWNLOAD is that, DOWNLOAD does not require the ‘FILENAME’ and
‘FILETYPE’ to be exported to the function; instead it will ask for the same at
runtime. However,
for WS_DOWNLOAD, these two
parameters need to be passed.
UPLOAD
function
Upload function is used to
upload the local file to internal table into SAP system.
Parameters passed are similar
to DOWNLOAD function.
For uploading, you have similar function called WS_UPLOAD.
Files with multiple record types
Many times the input files
will have records with different structures. In all such cases each record will
have a field, (usually the first)
which identifies the record (e.g.,
‘H’ for header, ‘D’ for detail or
‘1’ & ‘2’ etc).
Text tile with multiple record
types would be as mentioned below:
Hxxxxyyyyyyyynnnnnnnnn
Daaaaaaaaaabbbbbbbbbcccccccc
Daaaaaaaaaabbbbbbbbbbcccccccc
Hxxxxyyyyyyynnnnnnnnnnn
Daaaaaaaaaabbbbbbbbbbcccccccc
Daaaaaaaaaabbbbbbbbbbcccccccc
Processing Text file with
multiple record types:
To process such files, it is necessary to first read the record into a
character field that is a minimum of the lengths of the different structure in
the file. If ‘H’ type record is 30 char
long (including the record identifier) and ‘D’ type is 40 long (including the
record identifier), then this
character field should be at least 40 char long.
Pseudo logic for processing the sequential files with multiple record
types (text mode):
Open dataset.
Do.
Read dataset into character field.
If sy-subrc ne 0.
Exit.
Endif.
If record id of the char
field (or the first of field) is ‘H’
Do processing for ‘H’ type
of records.
Else.
Do processing for d type of
records.
Endif.
Enddo.
|
Pseudo logic for processing
the local files with multiple record types:
WS_UPLOAD into itab.
Loop at itab.
If itab-recid is ‘H’.
Do processing for ‘H’ type
record.
Else.
Do processing for ‘D’ type record.
Endif.
Endloop.
|
BATCH DATA COMMUNICATION
About Data Transfer In R/3 System
When a company decides to
implement the SAP R/3 to manage business-critical data,
it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement
existing application.
In the process of replacing
current applications and transferring application data,
two situations might occur:
¨
The first is when application data to be
replaced is transferred at once, and
only once.
¨
The second situation is to transfer data
periodically from external systems to SAP and vice versa.
¨
There is a period of time when information has
to be transferred from existing application,
to SAP R/3, and often this process
will be repetitive.
The SAP system offers two
primary methods for transferring data into SAP systems. From non-SAP systems or
legacy system. These two methods are collectively called “batch input” or
“batch data communication”.
2. CALL TRANSACTION
3. DIRECT INPUT
Advantages offered by
BATCH INPUT method:
1. Can
process large data volumes in batch.
2. Can
be planned and submitted in the background.
3. No
manual interaction is required when data is transferred.
4. Data
integrity is maintained as whatever data is transferred to the table is through
transaction. Hence batch input data is submitted to all the checks and
validations.
The batch input program must
build all of the input to execute the SAP transaction.
Two main steps are required:
¨
To build an internal table containing every
screen and every field to be filled in during the execution of an SAP
transaction.
¨
To pass the table to SAP for processing.
Writing a Data Transfer
Program involves following prerequisites:
Analyzing
data from local file
Analyzing transaction
¨
The transaction code,
if you do not already know it.
¨
Which fields require input i.e., mandatory.
¨
Which fields can you allow to default to
standard values.
¨
The names,
types, and lengths of the fields
that are used by a transaction.
¨
Screen number and Name of module pool program
behind a particular transaction.
To analyze a transaction:
¨
Start the transaction by menu or by entering the
transaction code in the command box.
(You can
determine the transaction name by choosing System – Status.)
¨
Step through the transaction, entering the data will be required for processing
your batch input data.
¨
On each screen,
note the program name and screen (dynpro) number.
(dynpro =
dyn + pro. Dyn = screen, pro =
number)
¨
Display these by choosing System – Status. The
relevant fields are Program (dynpro) and Dynpro number. If pop-up windows occur during execution, you can get the program name and screen number by
pressing F1 on any field or button on the screen.
The
technical info pop-up shows not only the field information but also the program
and screen.
¨
For each field,
check box, and radio button on each
screen, press F1 (help) and then
choose Technical Info.
-
The field name for batch input,
which you’ll find in its own box.
-
The length and data type of the field. You can display
this information by double clicking on the Data Element field.
¨
Find out the identification code for each
function (button or menu) that you must execute to process the batch-input data
(or to go to new screen).
Place the
cursor on the button or menu entry while holding down the left mouse button.
Then press F1.
In the
pop-up window that follows, choose
Technical info and note the code that is shown in the Function field.
You can also
run any function that is assigned to a function key by way of the function key
number. To display the list of available function keys,
click on the right mouse button. Note the key number that is assigned to the
functions you want to run.
Once you
have program name, screen number, field name (screen field name), you can start writing.
DATA
TRANSFER program.
Declaring internal table
First Integral Table similar to structure like local file.
Declaring internal table like BDCDATA
The batch input structure
stores the data that is to be entered into SAP system and the actions that are
necessary to process the data. The batch input structure is used by all of the
batch input methods. You can use the same structure for all types of batch
input, regardless of whether you are
creating a session in the batch input queue or using CALL TRANSACTION.
¨
Create a BDCDATA structure
¨
Write the structure out to a session or process
it with CALL TRANSACTION USING; and then
¨
Create a BDCDATA structure for the next
transaction that is to be processed.
The screen identifier record
is followed by a separate BDCDATA record for each value, to be entered into a field. These records use
the FNAM and FVAL fields of the BDCDATA structure. Values to be entered in a
field can be any of the following:
¨
Data that is entered into screen fields.
¨
Function codes that are entered into the command
field. Such function codes execute functions in a transaction, such as Save or Enter.
The BDCDATA structure
contains the following fields:
¨
PROGRAM: Name of module pool program
associated with the screen. Set this field only for the first record for the
screen.
¨
DYNPRO: Screen Number. Set this field
only in the first record for the screen.
¨
DYNBEGIN: Indicates the first record for
the screen. Set this field to X,
only for the first record for the screen. (Reset to ‘ ‘ (blank) for all other records.)
¨
FNAM: Field Name. The FNAM field is not
case-sensitive.
¨
FVAL: Value for the field named in FNAM.
The FVAL field is case-sensitive. Values assigned to this field are always
padded on the right, if they are
less than 132 characters. Values must be in character format.
Data is uploaded to internal
table by UPLOAD of WS_UPLOAD function.
Population of BDCDATA
All these five initial steps
are necessary for any type of BDC interface.
DATA TRANSFER program can call
SESSION METHOD or CALL TRANSACTION. The
initial steps for both the methods are same.
SESSION METHOD
About Session
method
In this method, an ABAP/4 program reads the external data that is
to be entered in the SAP System and stores the data in session. A session
stores the actions that are required to enter your data using normal SAP
transaction i.e., Data is
transferred to session which in turn transfers data to database table.
Session is intermediate step
between internal table and database table. Data along with its action is stored
in session i.e., data for screen
fields, to which screen it is passed, the program name behind it,
and how the next screen is processed.
When the program has finished
generating the session, you can run
the session to execute the SAP transactions in it. You can either explicitly
start and monitor a session or have the session run in the background
processing system.
Unless session is processed, the data is not transferred to database table.
BDC_OPEN_GROUP
You create the session through
program by BDC_OPEN_GROUP function.
Parameters to this function
are:
¨
User Name: User
name
¨
Group: Name
of the session
¨
Lock Date: The
date on which you want to process the session.
¨
Keep: This
parameter is passed as ‘X’ when you want to retain session after processing it
or ‘ ‘to delete it after processing.
BDC_INSERT
This function creates the
session & data is transferred to Session.
Parameters to this function are:
¨
Tcode: Transaction
Name
¨
Dynprotab: BDC
Data
BDC_CLOSE_GROUP
This function closes the BDC Group. No Parameters.
Some additional
information for session processing
However,
if the session is processed, you
have to delete it manually. When session processing is completed successfully
while KEEP option was not set, it
will be removed automatically from the session queue. Log is not removed for that session.
If the batch-input session is
terminated with errors, then it
appears in the list of INCORRECT session and it can be processed again. To correct
incorrect session, you can analyze
the session. The Analysis function allows to determine which screen and value
has produced the error. If you find small errors in data,
you can correct them interactively,
otherwise you need to modify batch input program,
which has generated the session or many times even the data file.
CALL TRANSACTION
About CALL TRANSACTION
Call transaction using
Update
Messages
into .
Parameter – 1 is
transaction code.
Parameter – 2 is
name of BDCTAB table.
Parameter – 3 here
you are specifying mode in which you execute transaction
A is all screen mode. All the screen of transaction are displayed.
N is no screen mode. No screen
is displayed when you execute the transaction.
E
is error screen. Only those screens are displayed wherein you have error
record.
Parameter – 4 here
you are specifying update type by which database table is updated.
S
is for Synchronous update in which if you change data of one table then all the
related Tables gets updated. And sy-subrc is returned i.e., sy-subrc is returned for once and all.
A
is for Asynchronous update. When you change data of one table, the sy-subrc is returned. And then updating of
other affected tables takes place. So if
system fails to update other tables,
still sy-subrc returned is 0 (i.e.,
when first table gets updated).
Parameter – 5 when
you update database table, operation
is either successful or unsuccessful or operation is successful with some
warning. These messages are stored in internal table,
which you specify along with MESSAGE statement. This internal table should be
declared like BDCMSGCOLL, a structure available in ABAP/4. It contains the
following fields:
1. Tcode: Transaction code
2. Dyname: Batch point module name
3. Dynumb: Batch input Dyn number
4. Msgtyp: Batch input message type (A/E/W/I/S)
5. Msgspra: Batch input Lang,
id of message
6. Msgid: Message id
7. MsgvN: Message variables (N = 1 - 4)
For each entry, which is updated in database,
table message is available in BDCMSGCOLL. As BDCMSGCOLL is structure, you need to declare a internal table which can
contain multiple records (unlike structure).
Steps for CALL TRANSACTION method
|
1.
|
Internal table for the data (structure similar to your local file)
|
|
2.
|
BDCTAB like BDCDATA
|
|
3.
|
UPLOAD or WS_UPLOAD function to upload the data from local file to
itab. (Considering file is local file)
|
|
4.
|
Loop at itab.
Populate BDCTAB table.
Call transaction
Update
Refresh BDCTAB.
Endloop.
(To populate BDCTAB
|
|
|
|
|
|
|
SESSION METHOD
|
|
|
CALL TRANSACTION
|
|
1.
|
|
Data is not updated in database table unless Session is processed.
|
|
|
Immediate updation in database table.
|
|
2.
|
|
No sy-subrc is returned.
|
|
|
Sy-subrc is returned.
|
|
3.
|
|
Error log is created for error records.
|
|
|
Errors need to be handled explicitly
|
|
4.
|
|
Updation in database table is always synchronous
|
|
|
Updation in database table can be synchronous Or Asynchronous.
|
Error Handling
in CALL TRANSACTION
When Session Method updates
the records in database table, error
records are stored in the log file. In Call transaction there is no such log
file available and error record is lost unless handled. Usually you need to
give report of all the error records i.e.,
records which are not inserted or updated in the database table. This can be
done by the following method:
Steps for the error handling
in CALL TRANSACTION
|
1.
|
Internal table for the data
(structure similar to your local file)
|
|
2.
|
BDCTAB like BDCDATA
|
|
3.
|
Internal table BDCMSG like
BDCMSGCOLL
|
|
4.
|
Internal table similar to
Ist internal table
|
|
|
(Third and fourth steps are
for error handling)
|
|
5.
|
UPLOAD or WS_UPLOAD function
to upload the data from the local file to itab. (Considering file is local
file)
|
|
6.
|
Loop at itab.
Populate BDCTAB table.
Call transaction
Update
Messages
Perform check.
Refresh BDCTAB.
Endloop.
|
|
7
|
Form check.
IF sy-subrc <> 0. (Call transaction returns the sy-subrc if
updating is not successful).
Call function
Format_message.
(This function is called to
store the message given by system and to display it along with record)
Append itab2.
Display the record and
message.
|
|
|
|
Common batch input errors
-
The batch input BDCDATA structure tries to assign
values to fields which do not exist in the current transaction screen.
-
The screen in the BDCDATA structure does not match the
right sequence, or an intermediate
screen is missing.
-
On exceptional occasions,
the logic flow of batch input session does not exactly match that of manual
online processing. Testing the sessions online can discover by this.
-
The BDCDATA structure contains fields, which are longer than the actual definition.
-
Authorization problems.
RECORDING A BATCH INPUT
A B recording allows you to
record a R/3 transaction and generate a program that contains all screens and
field information in the required BDC-DATA format.
You can either use SHDB
transaction for recording or
SYSTEM ® SERVICES ®
BATCH INPUT ®
EDIT
And from here click recording.
Enter name for the recording.
(Dates are optional)
Click recording.
Enter transaction code.
Enter.
Click Save button.
You finally come to a screen
where, you have all the information
for each screen including BDC_OKCODE.
¨
Click Get Transaction.
¨
Return to BI.
¨
Click overview.
¨
Position the cursor on the just recorded entry
and click generate program.
¨
Enter program name.
¨
Click enter
The program is generated for
the particular transaction.
BACKGROUND PROCESSING
Need for Background processing
When a large volume of data is
involved, usually all batch inputs
are done in background.
The R/3 system includes
functions that allow users to work non-interactively or offline. The background processing systems handle
these functions.
Non-interactively means that
instead of executing the ABAP/4 programs and waiting for an answer, user can submit those programs for execution at a
more convenient planned time.
There are several reasons to
submit programs for background execution.
¨
The maximum time allowed for online execution
should not exceed 300 seconds. User gets
TIMEOUT error and an aborted transaction,
if time for execution exceeds 300 seconds. To avoid these types of error, you can submit jobs for background processing.
¨
You can use the system while your program is
executing.
This does not mean that
interactive or online work is not useful. Both type of processing have their
own purposes. Online work is the most common one entering business data, displaying information,
printing small reports, managing the
system and so on. Background jobs are
mainly used for the following tasks; to process large amount of data, to execute periodic jobs without human
intervention, to run program at a
more convenient, planned time other
than during normal working hours i.e.,
Nights or weekends.
The transaction for background
processing is SM36.
Or
Tools ®
Administration ® Jobs
® Define jobs
Or
System ®
services ® Jobs
Components of the background jobs
A job in Background processing
is a series of steps that can be scheduled and step is a program for background
processing.
¨
Job name.
Define the name of assigned to the job. It identifies the job. You can
specify up to 32 characters for the name.
¨
Job class.
Indicates the type of background processing priority assigned to the
job.
The job
class determines the priority of a job.
The background system admits three types of job classes: A B & C, which correspond to job priority.
¨
Job steps.
Parameters to be passed for this screen are as follows:
Program name.
Variant if it
is report program
Start
criteria for the job: Option available for this are as follows:
Immediate - allows you to start a
job immediately.
Date/Time - allows you to start a
job at a specific name.
After job - you can start a job
after a particular job.
After event - allows you to start a
job after a particular event.
At operation mode -
allows you to start a job when the system switches to a particular operation
mode.
Defining Background jobs
It is two step process: Firstly,
you define the job and then release it.
When users define a job and
save it, they are actually scheduling the report i.e., specifying the job components, the steps,
the start time.
When users schedule program
for background processing, they are
instructing the system to execute an ABAP/4 report or an external program in
the background. Scheduled jobs are not
executed until they are released. When jobs are released,
they are sent for execution to the background processing system at the
specified start time. Both scheduling and releasing of jobs require
authorizations.
AN EXAMPLE WITH SESSION METHOD
Following program demonstrates
how data is passed from flat file to SAP transaction and further to database
table by using SESSION method.
The transaction is TFBA (to
change customer).
A simple transaction where you
are entering customer number on first screen and on next screen data is
displayed for the particular customer number. Field,
which we are changing here, are name
and city. When you click on save,
the changed record gets saved.
Prerequisite to write this BDC
interface as indicated earlier is:
1. To find screen number
2. To find screen field names, type of the field and length of the field.
3. To find BDC_OKCODE for each
screen
4. Create flat file.
Flat file can be created in
your hard disk as follows:
1 Vinod Krishna Hyderabad
2 Kavitha Secunderabad
3 Kishore Hyderabad
(Where 1st character field is
Customer number, 2nd
field is Customer name and 3rd field is City.)
To transfer this data to
database table SCUSTOM following interface can be used.
REPORT DEMO1.
*
Following internal table is to upload flat file.
DATA: BEGIN OF ITAB OCCURS 0,
ID(10),
NAME(25),
CITY(25),
END OF ITAB.
*Following
internal table BDCDATA is to pass date from internal table to session.
DATA: BDCTAB LIKE BDCDATA
OCCURS 0 WITH HEADER LINE.
*
Variables
DATA: DATE1 LIKE SY-DATUM.
DATE1 = SY-DATUM - 1. “ This is for Hold Date
* To
upload flat file to internal table.
CALL FUNCTION UPLOAD
EXPORTING
FILE NAME =
‘C:\FF.TXT’
FILE TYPE =
‘ASC”
TABLES
DATA_TAB =
ITAB
EXCEPTIONS
CONVERSION_ERROR =
1
INVALID_TABLE_WIDTH =
2
INVALID_TYPE =
3
NO_BATCH =
4
UNKNOWN_ERROR =
5
OTHERS =
6.
If sy-subrc = 0.
*
Calling Function to Create a Session
CALL FUNCTION ‘BDC_OPEN_GROUP’
EXPORTING
CLIENT =
SY-MANDT
GROUP =
‘POTHURI’
HOLDDATE =
DATE1
KEEP =
‘X’
USER =
SY-UNAME
EXCEPTIONS
CLIENT_INVALID =
1
DESTINATION_INVALID =
2
GROUP_INVALID =
3
GROUP_IS_LOCKED =
4
HOLDDATE_INVALID =
5
INTERNAL_ERROR =
6
QUEUE_ERROR =
7
RUNNING =
8
SYSTEM_LOCK_ERROR =
9
USER_INVALID =
10
OTHERS =
11.
If sy-subrc = 0.
*--------------------------
MAIN Logic------------------------------
LOOP AT ITAB
PERFORM GENERATE_DATA. “ Populating BDCDATA
Table
CALL FUNCTION ‘BDC_INSERT’
EXPORTING
TCODE =
‘TFBA’
TABLES
DYNPROTAB =
BDCTAB
EXCEPTIONS
INTERNAL_ERROR =
1
NOT_OPEN =
2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS =
7.
REFRESH BDCTAB
ENDLOOP.
* Calling function to close
the session
CALL FUNCTION
‘BDC_CLOSE_GROUP’
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
Endif.
Endif.
*&--------------------------------------------------------------------*
*& Form GENERATE_DATA
* Create BDC Data
*&--------------------------------------------------------------------*
FORM GENERATE_DATA
*
Passing information for 1st screen on BDCDATA
BDCTAB-PROGRAM = ‘SAPMTFBA’.
BDCTAX-DYNPRO = 100.
BDCTAP-DYNBEGIN = ‘X’.
APPEND BCDTAB.CLEAR BDCTAB.
*
Passing field information to BDCDATA
BDCTAB-FNAM = ‘SCUSTOM-ID’
BDCTAB-FVAL = ITAB-ID.
APPEND BDCTAB.CLEAR BDCTAB.
*
Passing BDC_OKCODE to BDCDATA
BDCTAB-FNAM = ‘BDC_OKCODE’.
BDCTAB-FVAL = ‘/5’.
APPEND BDCTAB.CLEAR BDCTAB.
*
Passing screen information for next screen to BDCDATA
BDCTAB-PROGRAM = ‘SAPMTFBA’.
BDCTAB-DYNPRO = 200.
BDCTAB-DYNBEGIN = ‘X’.
APPEND BDCTAB.CLEAR BDCTAB.
*
Passing screen information to BDCDATA
BDCTAB-FNAM = ‘SCUSTOM-NAME’.
BDCTAB-FVAL = ITAB-NAME.
APPEND BDCTAB.CLEAR BDCTAB.
* Passing screen
information to BDCDATA
BDCTAB-FNAM = ‘SCUSTOM-CITY’.
BDCTAB-FVAL = ITAB-CITY.
APPEND BDCTAB.CLEAR BDCTAB.
*
Passing BDC_OKCODE to BDCDATA
BDCTAB-FNAM = ‘BDC_OKCODE’.
BDCTAB-FVAL = ‘SAVE’.
APPEND BDCTAB.CLEAR BDCTAB.
ENDFORM. “GENERATE_DATA
AN EXAMPLE WITH CALL TRANSACTION
Same steps to be repeated for
CALL TRANSACTION
The only difference between
the two types of interface is in Session method,
you create session and store information about screen and data into session.
When session is processed the data is transferred to database. While in CALL
TRANSACTION, data is transferred
directly to database table.
REPORT DEMO1.
*
Follow above Code till MAIN Logic. Even the Subroutine should be copied
LOOP AT
ITAB
PERFORM GENERATE_DATA,
“Populating BDCDATA Table
Call transaction ‘TFBA’ using BCDDATA Mode ‘A’
Update ‘S’.
REFRESH BDCTAB
ENDLOOP.
